Rebar Bending Machine

We can provide three kinds of rebar bending machine asfollowing:

1, Name: GW40 rebar bending machine
Description:
This product has three kinds: GW40 Manual, GW40(A)semiautomatic,
GW40(Z)full-automatic
Use and feature:
This machine is used for bending all kinds of A3 steel and Grade IIscrew thread steel. The process is simple. It can bend bars to besame shape, adjusting easily, operating conveniently, usingreliably, and with stable capability. The machine can bend the barsto be different shape according to demands. After a long termusage, we may adjust the work tray by 180 degree, then the innerparts will also be changed 180 degree, it will make the accessoriesof machine to be damaged equally, and then extend the life of themachine. Except the capability of GW40 manual one, GW40A hasadvantage of auto-bending, the process is simple and it can makeall kinds of shape with correspond pole. The GW40Z machine adoptsno-touch switch sensor and inset microcomputer controlling system,it conquers the shortcoming of big bend angle error in traditionalbending machine, it is the replacement of traditional bendingmachine.
Main technique parameter:
Diameter of steel bar: 6-40mm (normal type of steel bar)
6-36mm (screw thread steel)
Tensile strength of steel bar:
Rotate speed of principal axis: 5-10 R/min
Power & rotate speed of motor: 3kw, 1400R/min
Packing size (L*W*H): 750mm*750mm*720mm
Weight: 345kg

2, Name: GW50 rebar bending machine
Description:
This product has three kinds: GW50 Manual, GW50(A)semiautomatic,GW50(Z)full-automatic
Use and feature:
This machine is used for bending all kinds of A3 steel and Grade IIscrew thread steel. The process is simple. It can bend bars to besame shape, adjusting easily, operating conveniently, usingreliably, and with stable capability. The machine can bend the barsto be different shape according to demands. After a long termusage, we may adjust the work tray by 180 degree, then the innerparts will also be changed 180 degree, it will make the accessoriesof machine to be damaged equally, and then extend the life of themachine.
Main technique parameter:
Diameter of steel bar: 10-50mm (normal type of steel bar)
10-40 mm (screw thread steel)
Tensile strength of steel bar:
Rotate speed of principal axis: 3.7-14 R/min
Power & rotate speed of motor: 4kw, 1400 R/min
Packing Size(L*W*H): 890mm*890mm*860mm
Weight: 450kg

3, Name: GW65 rebar bending machine
Diameter of steel bar: 10-65mm (normal type of steel bar)
10-50mm (screw thread steel)
Tensile strength of steel bar: 65mm (σ S
50mm (σ S
45mm(σ S
Diameter of working disc: 550mm
Rotate speed of principal axis: 2.8 R/min; 4 R/min; 8 R/min
Electricity model/power/rotate speed: Y132M-4/7.5kw/1420R/min
Packing Size (L*W*H): 1250mm*1100mm*900mm
Weight: 980kg.